Letterbox Mail Post Peg

Mail Posting Peg Pusher. One of the hazards of when delivering/posting mail through letterboxes is the risk injury to fingers being bitten by dogs or scratched by cats! The Mail Posting Peg Pusher enables mail to be safely posted fully through the letterbox without the need putting fingers inside the letterbox.  One end of the Mail Posting Peg Pusher has an open ended Y section. Mail being posted, is placed within the open Y end section. If posting flimsy envelope's, fold the envelope slightly over the outside of the open ended Y section of the Mail Posting Peg Pusher. 

I've printed the item on Bambu Lab A1 Mini using Bambu Lab PLA Basic filament. Infill setting set to gyroid. System Pre-set print setting set to 0.2mm Strength@BBL A1. For securing the item to the print bed I ‘ve used brim ears to prevent lifting during printing. I also used tree support for the raised overhang on the Y end section. For the print speed I’ve used Standard 100%. The nozzle size used 0.4.

Dimensions

• Length - 210mm
• Width - 39.5mm
• Depth - 3mm