Flug Helo is the second design in the Flug lighting series — a lightweight, 3D printed lampshade inspired by the gentle rotation and balance of a helicopter rotor. With its minimal yet dynamic form, Flug Helo casts soft, ambient light and adds a sculptural element to any interior.
Each shade is individually 3D printed using sustainable materials. Minor surface variations or layer lines may be visible — a natural result of the printing process. These subtle imperfections are part of what makes every Flug Helo one-of-a-kind. In a world of mass production, nothing truly perfect is ever truly personal.
Installation Instructions:
- Handle with care. The lampshade is lightweight and delicate.
- Turn off power to the light fixture before installation.
- Align the central opening of the Flug Helo with the socket fitting.
- Secure the lampshade using the provided ring or clip, depending on your fixture type. Do not overtighten. (opening is 40MM)
- Install bulb E27
- Restore power and enjoy the soft, atmospheric glow of Flug Helo.
⚠️ Important Safety Notice:
- This lampshade is designed for use with LED bulbs only. Do not use incandescent or halogen bulbs, as they may generate excessive heat and damage the material.
- Keep away from direct heat sources and avoid contact with moisture.
- Not suitable for outdoor use.
- Always install according to local electrical safety regulations. If unsure, consult a qualified electrician.
I used the following parts of Amazon
Dutch3Dnewbie
