Weatherproof Cable Housing - 2 Versions

This is a housing for a LP20 weatherproof connector. I used it so that I could quickly move my starling dish from where I had it mounted on my home, over to my camper van. 

There are two versions, one with an open bottom so the cable can come from underneath, and the second version with a sealed bottom that uses a M20 X 1.5 cable gland. Both need 4 M3 X 4 heat press inserts. 

Here's a link to the connector I used. (Make sure you get the bolt down version with the 4 holes).

https://www.aliexpress.us/item/3256806594701453.html?spm=a2g0o.order_detail.order_detail_item.4.5399f19cUDj2P6&gatewayAdapt=glo2usa

I recommend printing in ASA so that it can stand up to the elements if it's going to be outside.