Desk Edge Socket Holder

The Desk Edge Socket Holder V1 is a 3-part desk mount designed to hold a power socket securely on the edge of a table.
It consists of a cable-side bracket, a socket-side bracket, and a clamping screw with a printed thread.
This first version features a 45° mounting angle, making it ideal for a clean and ergonomic setup.

The mount is designed for sockets with dimensions of 45 mm (width) × 40 mm (height) or 46 mm (width) × 25 mm (height)  and fits tabletop thicknesses up to 35 mm.
If you need a different size or fit, feel free to contact me — I’m happy to adjust the model to your specifications.

Printing details:

• Printed with PLA (other materials possible)
• 0.2 mm layer height recommended
• 20–30 % infill
• No supports required (depending on printer orientation)

Assembly:
Simply insert both brackets around the socket, align them on the table edge, and tighten the clamping screw until the mount is securely fixed.

Update (October 19, 2025):

• The screw thread tolerance has been adjusted from +0.2 mm to +0.1 mm for improved fit.
• A cable-side bracket with a cable slot has been added to allow easier insertion of the power strip plug.

Update (October 21, 2025):

• All files updated with geometry adjustments and optimizations:
  • Fixing screw_V01.03
  • Cable-side bracket_V01.02
  • Opposite bracket_V01.02
  • Cable-side bracket with cable slot_V01.02

Disclaimer:
This product is intended for hobby and light use only. It is not a toy and is not suitable for children under 14 years of age. Contains small parts that may pose a choking hazard. The creator assumes no liability for any injuries or damages resulting from the use or handling of this product. By printing or using this file, you accept full responsibility for its safe use and agree to hold the creator harmless from any claims or liabilities arising from it.