Keychain — 3D printable CS2 team logo

This package contains an STL model of the [TOP 10 HLTV] keychain logo optimized for FDM 3D printing. The model is sized for everyday use (≈45–60 mm across depending on the logo) with a reinforced keyring hole and a flat backside for easy post-processing.
 

Suggested final print size: ~45–60 mm (adjust in your slicer).
 

   Recommended print settings:

   Layer height: 0.16–0.24 mm

   Wall/shells: 2–3 perimeters

   Infill: 10–20% (increase to 25–30% for thin/delicate logos)

   Print speed: 40–60 mm/s

   Material: PLA (recommended) — PETG if you need extra toughness

   Supports: usually none required; enable supports for complex cutouts or overhangs

Brim: recommended for small contact area parts to avoid lifting
Multi-color tips: to print with two colors, pause the print at the layer where color changes occur or slice as separate parts and glue together.
Post-processing: light sanding, primer, and acrylic paint for a polished look. Use superglue to attach keyrings.
License & use: This file is intended for personal use and small-scale commercial sale of printed items. If you plan large-scale distribution or use of trademarked logos, check the team’s licensing policies.
If you want a version resized, hollowed, or split for two-color printing — message me and I can provide a modified STL.

A link to the name rack of CS2 keychains https://makerworld.com/en/models/1907568-stand-for-cs-keychains-universal-stand#profileId-2045164