Graffiti Edmonton Oilers Hueforge

Boost MeWith the changes to points, boosts are one of the best ways to support creators! Any support is welcome!

 

Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrinting

 

MembershipCommercial License also available here!

 

Check out the rest of my NHL series here: https://makerworld.com/collections/10866364

 

Second installment in my NHL series! Edmonton, born and raised!

 

This print is the maximum build plate size for an A1 Mini, but it should work on any printer.

 

If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #ff6a13 PLA BambuLab Basic Orange  Transmission Distance: 7
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #5 (0.48mm) swap to Blue
    At layer #7 (0.64mm) swap to Orange
    At layer #20 (1.68mm) swap to Jade White for the rest.