Goku_Hueforge

Cuadro rígido de goku, 20x11,2 cm 

Trabajo hecho con hueforge

Recomiendo poner cinta de doble adhesión para pegar en superficies lisas.

Instrucciones de impresión:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.13x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #8c9099 PLA PolyLite Grey  Transmission Distance: 1
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Red
    At layer #15 (1.28mm) swap to Grey
    At layer #17 (1.44mm) swap to White for the rest.