Mickey and Minnie Mouse Halloween Pumpkin Lamp

 

A Mickey Mouse pumpkin head lamp for the MH001 lamp kit from BambuLab or similar. It is relatively looser fitting with retention fingers so other lamps can fit. It features a large central pumpkin with two smaller pumpkins as ears. Works great as a night light or a Haloween decor.

 

 

The base can also be spun a little so you can face the lamp where you need it to be, some antislip stickers on the bottom are advised.

 

 

Boo!

 

 

The green stalk sits on top for a charming, festive touch. 

 

 

Rather than making a seperate model, I included Minnie (its basically printing the bow and gluing it). The profile contains a solid and a hollow bow in case you want to use transparent filament for it. Eyelashes are on their way

 

 

 

The LED lamp screws easily into the bottom, making assembly simple and quick. However, it can be a challenging print for bedslinger printers due to its shape and overhangs. A reduction of speed is recommended as well as ensuring that it sticks to the plate (supertack, use of glue or a fresh wash is not just recommended, it is required!)

 

 

 

 

 

 

The model has 4 walls, ensuring maximum strength and good light transmission. There are a LOT of supports…

 

 

 

but work your way through them with a pair of thin pliers and they should come out without much fuss. Twist to take the big pieces out and dont put extra force on the side with the face. 


Take extra care when removing it from the holes, that is the weakest part.

If the ears are giving you problems, longer pliers or a pen can be useful.

Boost Me