Mini gt 小車展示盒 1.0

這是我自己設計的minigt展示小車盒上方使用5mm寬的 cob燈條 這只是1.0版本 後面完成體還會再更新! 未來擴充組件有上、下層的壓克力罩 以及上方的小場景設計 敬請期待 另外參數設定可能沒有那麼好 我使用的是 消光的PETG 最近試了好幾組都失敗 希望看到這篇的玩家也可以調整最佳化參數 

This is a mini GT display case I designed myself. It uses a 5mm-wide COB light strip on top. This is just the 1.0 version — I’ll be updating the final version soon! Future add-ons will include an acrylic cover for the top and bottom layers, plus a small diorama setup on the upper section. Stay tuned!

By the way, the print settings might not be fully optimized yet — I used matte PETG, and a few test prints failed. Hopefully, others who try this can fine-tune the settings for better results.

注意!!請勿使用此圖當作商業用途

⚠️ Note: This image is not for commercial use.