Gobble Gobble Thanksgiving Sign

Hey All,

 

Here is Thanksgiving sign #4. The colors can all be changed in Bambu studio by each individual part, so you can customize colors as needed. I have a couple images of color examples attached so you can see the possibilities (there is a 4 color one AMS print profile as well). Ironing is turned on for an extra smooth top look. This sign can also be scaled to fit different size printers as needed.

 

The main sign is free standing like in the image (stand optional). There is also a version that is just thin so it uses less filament and time, but you will need a stand for it. Both of these are in the main print profile.

 

There is also a magnet version that is much thinner and has pre inserted slots for four 10x3mm magnets (this size can be changed by altering the negative cylinders I have in objects, just make sure to adjust the pause if needed) . There is a pause ready for these so you can insert, then resume easily. It has its own print profile.

 

If you are interested in a stand that can be used for both the thin and free standing versions (as seen used in my images) there is a great one here:  Made by maker Kopp3D ( I used the medium version): https://makerworld.com/en/models/479988-simple-display-stand-parametric-fully-customizable#profileId-405824

 

I will attach materials and filament colors I used in my example below.

 

Boost MeIf you enjoyed this model boosts are much appreciated.