3D Printed Darts Target Set

This printable dart target set includes a target board, a simple stand, and lightweight darts.

For best results, print the target with 4 walls, 0 top/bottom layers, and 30–35% Grid infill (31% works perfectly).

To achieve a color change on the outer rings without AMS, set a filament swap at layer 26 (for 0.2 mm layer height).

Print darts with brim and add a modifier on the dart tip to increase wall count to 10 for better weight balance.
 

All these settings are applied in uploaded print profile.

After printing, insert a short piece of filament into the dart’s tip and cut it at an angle to form a point — the tip should be around 20–25 mm long.

 

 

For best throwing results, place the target around waist height so that darts fall slightly from above.

 

 

Boost MeIf you like this design, please give it a boost - it really helps!