X1C P1S 4-in-1 PTFE Adapter Holder For Side Spool

A Bambu 4-in-1 PTFE Adapter holder for the X1C and P1S. Two versions of mounting holders for one with a side spool holder and one without. The side spool guide is designed to be low profile to work with my folding side spool holder design on MakerWorld or other similar designs.

Hardware Needed

• Bambu 4-in-1 PTFE Adapter
• 2x M3x8mm machine screws
• Some 4mm OD x 2.5mm ID PTFE tubing

Assembly

• Remove the two screws on the back of the printer

• Screw on the mounting bracket using two M3x8mm machine screws

• Slide in the 4-in-1 PTFE Adapter whilst pushing out the printer's PTFE tube into the outlet of the adapter from the inside the printer. You may need to adjust the position of the collar if it's preventing the tube from getting pushed out. A Bambu Lab guide to re-adjusting the tube can be found on Youtube (replacing the tube is not needed). 

• Connect up the rest of the PTFE tubes into the inlet of the adapter