Chain Cable PTFE Clip P2S

• A small clip, with updated and very precise measurements, which prevents the PTFE cable from touching the top glass.
 

• On one side, the grip on the chain is very strong, while on the other side, it allows the PTFE cable to move freely.
 

• It fits perfectly with the Bambulab P2S printers, and most likely also with the X1C, P1P, and P1S.

• Recommended material: PETG

Update:

I created another version of the clip with the PTFE cable socket on the side, which creates much less tension on the PTFE cable.
I recommend removing the original clip first and installing this one as shown in the photo.
Recommended material: ABS / PETG