三角大花瓶 big planter

Powered by Make My Vase from MakerWorld (makerworld.com/makerlab/makeMyVase)

This planter was made with the vase generator and has a large volume, printed with the A1mini, which allows you to set the x-axis to 16cm. the walls are 4-5 layers thick and are very sturdy, and it is recommended to print in PETG.

0.24mm Draft @BBL A1M, all the material will be 116g.

With other printers, printing at 100% size and using more than 6 layers would be more consumable, probably more than 200g.

这个花盆是用花瓶生成器制作的，体积很大，用 A1mini 打印，可以将 x 轴设置为 16 厘米。壁厚 4-5 层，非常坚固，建议用 PETG 打印。

0.24mm Draft @BBL A1M，所有材料重 116g。

如果是其他打印机，用100%尺寸打印，用6层以上会比较费耗材，可能会超过200g。