This compact, star-shaped riser sits under a pot
What is
- A sleek 10-arm star that supports pots at multiple points for great stability.
- Flat center with rectangular arms; works on wood, tile, and concrete without wobble.
- One-piece print; nothing to assemble.
Adaptable
- Scales perfectly in your slicer: increase XY for bigger pots, increase Z for more lift.
- Rotation-agnostic: the radial layout supports round, square, or irregular pots.
- Any surface: use as a single riser for small pots or place 2–3 under trough/rectangular planters.
- Material-flexible: PLA for indoor, PETG/ASA for humid or outdoor spots, TPU for grippy, floor-safe contact.
- Remix-friendly: easy to stretch arms, change count, or add chamfers/feet if you want custom drainage height.
Suggested print settings
- Layer height: 0.20–0.28 mm
- Walls: 3+ (≥1.2 mm)
- Infill: 20–40% grid/gyroid (go 60–100% for very heavy pots)
- No supports; brim optional for small printers
- Orientation: face down on the bed (flat center on build plate)
Sizing guide (scale as needed)
- Ø100 mm (default) → great for 8–18 cm pots
- Ø140 mm → 15–25 cm pots
- Ø180 mm+ → large planters / outdoor use
- Z-height: 6–12 mm is plenty for drainage; raise Z for more airflow.
Pipould
