Hueforge Pirate Ship

I have been experimenting with Hueforge for about a month now, and this is the first model I liked will enough to publish. I hope you like it too.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
 

Filaments Used:
    #000000 PLA BambuLab Basic Black 10101 Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray 10602 Transmission Distance: 3
    #6c6865 PLA BambuLab Basic Gray 10103  Transmission Distance: 2
    #e4bd68 PLA BambuLab Gold 10401  Transmission Distance: 3.5
    #ffffff PLA BambuLab Basic Jade White 10100 Transmission Distance: 5
 

This print uses 5 unique filaments

Swap Instructions:
    Start with Basic Black 10101
    At layer #11 (0.96mm) swap to Blue Gray 10602
    At layer #22 (1.84mm) swap to Gray 10103
    At layer #28 (2.32mm) swap to Gold 10401
    At layer #33 (2.72mm) swap to Jade White 10100
    At layer #36 (2.96mm) swap back to Basic Black 10101 for the rest.
 

AMS:

Load Black, Blue Gray, Gray, and Gold in slots 1-4. When slicing, assign the slots 1-2-3-4-2. Once you hit layer 28 and before you hit layer 33 replace the Gray in slot 2 with Jade White.