Fully printable Machinist Jack

Here's a fully printable Machinist Jack with infinitely adjustable heights ranging from about 47mm to 75mm.

The model's thread pitch is 1.5mm, with a full turn in either direction producing a change in height of approx. 1.5mm.  Of course this is not as fine as a M5's screw pitch of 0.8mm, but it still provides plenty of control & precision.

Recommended print settings with a 0.4mm nozzle, 4 walls and 30% infill

I've also included an optional screw with a notched top.

2024-06-07:  I'm going to say that this is a remix of this; as I was heavily inspired by its simple shape, after seeing either it or one similar within a Youtube video

https://www.printables.com/model/789794-machinist-jack