Magic: The Gathering Avatar Airbending Counters

Airbending Counters for Magic: The Gathering Avatar

 

Before you head to prerelease, or as you finish building your Avatar Aang commander deck, print some of these Airbending Counters!

 

 

• Quick to print: 9 counters will print in just 40 minutes with the 0.4mm nozzle or a little under 3 hours with the 0.2mm nozzle (print profile is with the 0.2).
• Dual Sided: The image is on both sides.
• Customizable: The image is embedded in the model, so it's easy to change the colors to your liking.

Boost MeLike my designs? Consider sending me a boost. They keep me inspired to make more Magic: The Gathering accessories.

Want to sell physical copies of my prints? Subscribe to my Patreon for a commercial license!

Not much to know special to print these. Like I said before, the images are with the 0.2mm nozzle, but they will print just fine with 0.4mm nozzle. I do recommend setting the initial layer to .3mm if you print with the 0.4mm. Also set the heatbed to 60 degrees and slow the initial layer down to 30mm/s to help with adhesion.