October 30, 2025
Description
“Do not let your hearts be troubled. Tonight you shall sleep in peace.”
— Galadriel, The Fellowship of the Ring
There’s something I have always found fascinating about Lothlórien. The Golden Wood offers sanctuary while being a reminder that the old world is fading. Beauty endures even when darkness looms on the horizon.
This is a five color design, so if using the AMS you may need to either have multiple units, or alternatively you can map the first color to print (black) to the same slot as one of the later colors (like white) then manually swap the spools while the other colors are printing. For the gradient to properly work in the light shaft, different filaments may behave in different ways. I used BambuLab filaments to hopefully give everyone a good baseline to work with.
Each print is 133.33x200mm and requires only five colors.
These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215
Project: Lothlorien_Front.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
Filaments Used:
This print uses 5 unique filaments
Swap Instructions:
License:
Standard Digital File License
Serics
