Wookiee - Chewbacca Filament Painting (With Frame)

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

MembershipC3D Commercial Membership - Authorized Merchant

 

 

Wookiee is a portrait of a Kashyyyk guardian caught in that quiet beat before a roar, mane riding the wind like the canopy tides of the Wroshyr trees. The profile leans heroic rather than feral, a nod to the life‑debts and battlefield bravery that made Wookiees the most trusted copilots in the galaxy.

 

Printing tips

Maker notes:

• Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧
   

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4 / Amazon
PLA Bambu Basic Cocoa Brown Transmission Distance: 0.4
PLA KINGROON Brown Transmission Distance: 3.3 / Amazon
PLA Anycubic Pantone Peach Fuzz Transmission Distance: 4.2 / Amazon
PLA eSun Fire Engine Red Transmission Distance: 2.9

Color Pallete 5 Color Version:

Swap Instructions 5 Color Version:

Start with Black
  Start with Black
    At layer #15 (1.28mm) swap to Cocoa Brown
    At layer #17 (1.44mm) swap to Brown
    At layer #20 (1.68mm) swap to Peach Fuzz
    At layer #29 (2.4mm) swap to Fire Engine Red for the rest.
 

Boost MeEnjoying this model? Give it a boost! 🌟 Your support helps my creations reach more makers—thank you for keeping the magic alive! ✨🚀

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!
YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO

Drop me a follow!🤜🤛