Mandolorian HueForge

4 Colors

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Graphite Gray Transmission Distance: 2.5
PLA Gray Transmission Distance: 3
PLA White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Gray
At layer #11 (0.96mm) swap to Gray
At layer #19 (1.6mm) swap White for the rest.

5 Colors

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Graphite Gray Transmission Distance: 2.5
    PLA Gray Transmission Distance: 3
    PLA Black Transmission Distance: 0.3
    PLA Orange Transmission Distance: 5
    PLA White Transmission Distance: 6

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Gray
    At layer #8 (0.72mm) swap to Gray
    At layer #15 (1.28mm) swap to Black
    At layer #17 (1.44mm) swap to Orange
    At layer #23 (1.92mm) swap to White for the rest.