Merry Grinchmas Sign

Hey All,

 

Here is Christmas sign #5. The colors can all be easily changed in Bambu studio by each individual part under objects, so you can customize colors as needed (no painting needed). 

 

Unfortunately to add Max I had to do 6 colors on this one. If you just make him and his horn both white then you can get this to 4 colors. I also have an alt version in my next post and Max isn't in it, it is 4 colors by default, check it out here: https://makerworld.com/en/models/1949229-merry-grinchmas-sign-alt#profileId-2094291 

 

Ironing is turned on for an extra smooth top look. 

 

This sign can also be scaled to fit different size printers as needed.

 

The main sign is free standing like in the image (stand optional). There is also a version that is just thin so it uses less filament and time, but you will need a stand for it. Both of these are in the main print profile.

 

There is also a magnet version that is much thinner and has pre inserted slots for four (10x3mm) magnets (this size can be changed by altering the negative cylinders I have in objects, just make sure to adjust the pause if needed) . There is a pause ready for these so you can insert, then resume easily. It has its own print profile.

 

If you are interested in a stand that can be used for both the thin and free standing versions (as seen used in my images) there is a great one here:  Made by maker Kopp3D ( I used the medium version): https://makerworld.com/en/models/479988-simple-display-stand-parametric-fully-customizable#profileId-405824

 

I will attach materials and filament colors I used in my example below.

 

**Disclaimer:**  
Fan art by **Rakenra** — shared for **personal, non-commercial use only.**  
Not affiliated with or endorsed by any studios or IP owners.  
Users must comply with copyright and trademark laws.
 

 

Boost MeIf you like this sign or any of my others boosts are much appreciated!