Ruri Dragon - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 138.84x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #13 (1.12mm) swap to Beige
    At layer #23 (1.92mm) swap to Ivory White for the rest.