Pluto Hueforge - Glow in the dark

I do not have an AMS so the .3MF profile has pauses for manual filament changes. You will have to modify the pauses for color changes if you have an AMS.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Dark brown
    At layer #14 (1.2mm) swap to White for the rest. (White Glow in the dark filament recommended)