February 21, 2024
Description
For the pieces to fit, you need to set Horizontal Expansion (cura) or XY Size Compensation (prusa) to at least -0.05 [mm]. If your printer is not calibrated very well, try around -0.1 [mm].
Note: some pieces might require supports (Bracket and Stud)
| Name | Color | Quantity |
|---|---|---|
| 1x1 stud | Silver (Sunlu Silk Silver PLA) | 1x |
| 1x2 tile | Black (Sunlu Silk Black PLA) | 1x |
| 1x3 plate | Black (Sunlu Silk Black PLA) | 2x |
| 1x3 plate | Green (Prusament Galaxy Green PLA) | 1x |
| Bracket | Grey (Sunlu Gray PLA) | 1x |
License:
BY-NC-SA
Andor @fullydefined
