Redcat Ascent 32 7mm Wheel Hex

These are 7mm wheel hexes for the Redcat Ascent 32. The stock wheels are 0.8" with 43mm tires and a 5mm wheel hex. The 7mm hex will allow you to run the more common 0.7, 0.8, 0.9, or 1.0 wheels. The wheels pictured are the stock 0.9" wheels and 47mm tires from an FCX24M. While these hexes will allow mounting of all the more common wheel & tire setups, the stock servo on these trucks is very small and will likely struggle if you start adding heavier wheels or tires. So far, it has been fine with these plastic wheels and slightly larger tires. Please note that wheel offset will be a factor in clearing the steering links. Not all wheels will fit without rubbing and/or binding. I have only verified that these specific wheels will clear. Use caution when adding more weight to the wheels and double check for binding before operating.