5pc Build Plate Rack - Bambu X1/P1

Same setup as the 10pc plate holder, but in a compact 5 plate model! Link to the 10pc setup below. The model picture is of the 10 plate version attached to the side of the X1.

Simple rack to hold up to 5 build plates. Screws together with 3mmx14mm socket head cap screws. I included both 3mf and stl files with a multi color stand 3mf file. The 10 plate holder stands on it's own, but this 5 plate version will most likely need the stands if you wish to have it vertical, or opte to use 3m tape and attached it to the side of the X1 like I did. Although since the stand does bolt onto the rack, you can use it to mount to the underside of a bench or shelf in the vertical position.

NEW H2D VERSIONS!!!

5 plate

https://makerworld.com/en/models/1289365-h2d-5-build-plate-rack-with-side-cover#profileId-1319235

10 plate

https://makerworld.com/en/models/1289348-h2d-10-build-plate-rack-with-side-cover#profileId-1319220

You can also join this 5pc rack with the 10pc rack with these nifty couplers!

https://makerworld.com/en/models/713548#profileId-644013

And be sure to check out my Hex system adapter mounts so you can mount the rack to the a hex wall!

https://makerworld.com/en/models/28605#profileId-303443

10 pc Rack system

https://makerworld.com/en/models/19526#profileId-18252