November 9, 2025
Description
This is a print of an AI generated image of Ellie based on The Last Of Us series
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.38x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#080a0d PLA Esun Black Transmission Distance: 0.5
#646464 PLA+ Sunlu Grey Transmission Distance: 3.5
#55351c PLA+ Esun Brown Transmission Distance: 1.5
#930000 PLA+ Sunlu Red Transmission Distance: 6
#ffd181 PLA+ Polyterra Peach Transmission Distance: 4.5
#ffffff PLA+ Esun Cold White Transmission Distance: 2.5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #12 (1.04mm) swap to Brown
At layer #15 (1.28mm) swap to Red
At layer #18 (1.52mm) swap to Peach
At layer #24 (2mm) swap to Cold White for the rest.
License:
Standard Digital File License
xBased
