Crystal Carillon (from Sailor Moon)

This is my version of the Crystal Carillon from Sailor Moon.

 

There are a lot parts so I would advice to try to assembly everything first before trying to glue, except the tiny stars on the handle and the connetors and also the heart gems. Do not place those before you intend to glue, because these are tight. 

Also the tiny stars follow an oval path so try to follow the shape of the handle.

 

When placing the bigger stars, if you look closely there are some small cavities, those go up, just like you see in one of the pictures.

 

The part that goes first before everything is the clapper (sphere) for the bell. These are two parts, each one with a hole. You will need a little rope to tie them together. Tie it the clapper and then pass it through the hole the length you need and tie it to the other part. Then check if its the right length.

Sounds a little confusing but try all the parts first like I say.

 

The colors I used are not the ones that I wanted , but these ones where the ones I had so I went with it. You can always try to use something else that looks better. The colors I had in mind are the ones listed in the bill of materials and on 3mf file.

 

No AMS is needed for this print, all colors are separate.

 

Hope you like this print.

Any boosts are appreciated.

 

Boost Me