Christmas Bauble Ornament Scandinavian Style

Decorative Christmas Bauble - Scandinavian Style

This is a 3D-printable model of a decorative Christmas bauble featuring a clean, modern spiral design. The ornament has a symmetrical spherical shape divided by a horizontal midline ridge and topped with a small ring for hanging.

Design Details:

• Shape: Perfect sphere with an integrated top loop and a decorative cap design.
• Surface Pattern: Spiraling grooves wrap diagonally around the upper and lower halves of the bauble, giving it a dynamic, elegant texture.
• Center Band: A slightly raised band encircles the middle, visually dividing the ornament into two mirrored halves.
• Top Section: The top has a small cylindrical cap with subtle cutout-style notches and a loop for stringing or hooks.

Recommended Print Settings:

• Print Orientation: Print with the loop facing upward to minimize support use.
• Supports: Required under the hanging loop only.
• Infill: 10–20% (for lightweight decoration).
• Layer Height: 0.2 mm for standard prints or 0.1 mm for fine details.
• Material: PLA or PETG recommended for indoor decorative use.

• Size: The standard version matches a typical 5-6 cm (2.4 inches) diameter ornament, 

  but it can be scaled up or down easily—half size (~4 cm) still retains detail.

💡 Print Efficiency Note: All of my 3D models are intentionally sliced to be highly energy, time, and material efficient. This means the models are designed to be printed hollow (with reduced infill/density) by default. For users who require a full-density or solid print for maximum strength, please adjust your slicer's quality and strength settings to increase the infill density as needed.

I hope you enjoy this design! Please click the like button, a boost is also highly appreciated. Thank you! :)