Magnetic Swappable Display Name Tag

This is a magnetic swappable name tag. It uses 5x2 magnets in a grid to snap other magnetic prints in place. This allows you to change your name tag display for every season, holiday, mood, event, etc, in seconds. To print, type your name and apply any font you choose, then make sure the print pauses on the layer just before the magnet holes fill. Once your print pauses, add the magnets, then resume printing. To make your own prints fit on the name tag, just put a magnet in the center, then 12mm up, down, left, right (wherever they fit), and diagonal (12mm up and right, up and left, etc). You do not need to fill the whole grid; I have found that 3 magnets are enough. I have an A1 mini, but I will probably add a new file with a magnetic grid on both sides for larger printers if anyone requests or if I get bored. 

Use 5x2 magnets for the name tag and 5x1 for any magnets you are putting on the name tag (5x2 works, but is thick and doesn't work with thin prints)