Nordschleife Nurburgring 3D Mini (Large)

3d miniature of the Nürburgring in Nürburg, Germany!

 

Includes an AMS-compatible multicolor print profile highlighting both the Nordschleife & Grand Prix circuit! (AKA the 24hr layout)

 

Model created in Blender primarily using data from the Blosm addon.

 

 

Smaller Nürburgring highlighting the GP circuit: https://makerworld.com/en/models/180660#profileId-198781

 

Check out my collection of other miniatures: https://makerworld.com/en/u/1935755220/collections/146964

 

Collection of F1 Miniatures: https://makerworld.com/en/u/1935755220/collections/450282

 

Slicing & Printing Details

 

This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.

Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!

 

Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).

The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print!

 

Filament used in photos: Sunlu Matte White (miniature), Bambu Matte Charcoal/Black (frame), Sunlu Sky Blue (water)

 

Framing Details

 

This model measures almost exactly 7.5x9.5in (242.31mm X 191.08mm) and should fit most 8x10 frames (assuming frame lip/overlap is around a half-inch). Feel free to change the scale/size of the model(s) to meet your needs.

 

 

I also included a large printable frame designed to fit my large miniature cities!

 

Note: This is a “large” miniature and will not fit the smaller ~5x7inch printable frame included with the other miniature cities!

 

 

Personally I use these cheap 8x10 frames from Amazon: https://www.amazon.com/dp/B08XVP48KQ

And blue printer paper: https://www.amazon.com/dp/B00006IDQT (not needed for this model since there is no “water”)

 

 

A frame is not required! This model looks great by itself and can be displayed almost anywhere.

 

MembershipSubscribe for a Commercial License to sell physical prints of my models! License stays valid as long as the subscription is active.