Eren Attack on titans Hueforge

Boost MeSi te gustan mis modelos puedes dame un impulso para continuar creandolos :)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 211.64x291.01mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #91202b PLA+ Elegoo Fire engine red  Transmission Distance: 5.5
    #d5ff01 PLA+ Sunlu Yellow  Transmission Distance: 10
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Fire engine red
    At layer #13 (1.12mm) swap to Yellow
    At layer #17 (1.44mm) swap to White for the rest.