Designed to match the footprint of the Gathering Moss planters, this drip tray fits snugly while maintaining a clean, modern look. It’s watertight, stackable, and prints beautifully with either PLA or PETG.
Material Options:
- PLA build + PETG interface supports – best for fast, smooth prints with a glossy base finish and crisp edges.
- PETG-HF build + PLA interface – ideal for higher-temperature or outdoor use, still keeping that injection-molded surface from the PLA interface layer.
Recommended Settings (Bambu printers):
- Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15–20 % (grid or gyroid)
- 5 top / 5 bottom layers for watertightness
- Ironing ON for the top surface
- Smooth build plate (textured optional for matte finish)
- Supports ON → “Support Interface Only” with 2 interface layers
Features:
- Tight tolerance fit with GM Planter bottom
- Slight outer lip prevents overflow and strengthens edges
- Shallow angle sides for easy nesting / stacking
- Compatible with standard 1020 nursery trays
Notes:
This design was tested on multiple Bambu printers using both material setups.
Boost MeLike my designs? How about sharing a boost with me? It would be much appreciated!
gathering_moss_ftw
