1/2U and 1U Full width rack shelf

I needed a rack shelf that used up the internal space to the 10" rack for something wider.

 

Because the shelf is bigger than the opening, you need to put it in vertically then bring it down horizontally so the rack shelf earn and on the mounting holes on the rack. Check the uploaded pictures for guidance.

 

Of course this means that removing the shelf will be in reverse order but you will have to clear the shelf to move it out.

 

I have added braces to the bottom of the shelf to make it stronger, however still recommended to be printed in PETG. The braces are either 1/2u or 1u. The example in the picture is for 1U

 

Boost MeIf you find it useful