Professional Restroom Door/Wall Signs - No AMS

Just a nice professional set of restroom signs!  You can hang on a wall, door or in a window.

There is a keyhole slot located on the back of each for easy hanging.  If hanging on a door, 2 sided tape would probably be best.

Sizes:  Individuals are 3 ½" round (or 90mm) Double is 7 ½ x 3 ½ (or 195mm x 90mm).  Triple is 9 ½ in wide by 3 ½" (or 245mmx90mm)   

Feel free to scale up or down.  Please note:  If you scale SMALLER, make sure you don't make the Z height any thinner than it is as it will effect the keyhole slot on the back.

Have an AMS?  Just add your colors and you are good to go as-is!

No AMS?

If you only have a single color 3D printer, just set up the print to pause/change filament on the following layers:

Start off with your base color. (This is the White layer in my photos) 
pause at layer 26 in your slicer to change your filament to the 2nd layer color (This is Black in my photos)
 

All plates are the same color layers so use the same setting on any plate.