The Final Bed Scraper

Optimal at least in my opinion =) Bed scraper with the most efficient shape for ease of use that's automatically always in the proper orientation. Small diameter to easily initiate the peel of the purge without touching the z-screw on the left side. Replacable press-in-place / friction fit efficient scraper blades with long total edge length and only 0.9g each. Very comfy and secure grip with fuzzy skin.

 

Versions:

1. Non-magnetic

    

2. Magnetic
   1. Velcro

   2. Double-sided foam tape

       

 

 

Magnetic version

Using 2pcs - 8x2mm / 6x3mm / 6x2mm magnets. I use 8x2mm and it's very secure with strong magnetic force. Stronger would be too much imo which is why it's not provided. Print automatically pauses when magnets are to be inserted. Layer for pause is written above plate in the slicer. Use a small dot of super glue to secure the magnet from attacting to the nozzle and dislodging from its hole. Let dry for 30 seconds before resuming.

Press the magnetic holder into the backside of the tape to make indentation to show where to cut.

 

Hope you like it!

Boost Me

Check out my other mods.