Designed for 17-18ml dropper bottles (Vallejo, Army Painter, AK Interactive, and compatibles), the TiltMod Rack is 100% tabletop, modular, and tiltable. No screws: just print, snap together, and paint!
🚀 How It Works
Base Module → 3 slots + 2 side supports
Print as many as you need (3, 6, 9… paints per row)
Modular Stacks → choose the right base:
1 module (X1C, P1S, P2S)
2 modules (X1C, P1S, P2S)
3 modules (H2D, H2S)
45° Tilt → tiltable trays for easy access and full visibility
Perfect Snap-Fit → side supports lock into bases with a solid click
🔧 Assembly (1 minute)
Print the Base Modules
Open the base module file (includes 1 row of 3 slots + 2 side supports)
Duplicate in your slicer and print as many copies as neededÂ
Print the Stack Base
Choose one plate based on stack height:
1-columns plateÂ
2-columns  plateÂ
3-columns plate (ONLY FOR H2D AND H2S)
Each plate includes tabletop base + top connector
Optional Wall-Mount Connectors (for tall stacks)
Print the wall-mount connector variants (1, 2, or 3 rows)
These replace standard top connectors and include M3/M4 screw holes for wall mounting
Recommended for 3+ rows to prevent tipping
Snap Together
Insert side supports into base connectorsÂ
Stack additional rows on top connectors
Tilt trays to 45° → ready to use!
WARNING: As long as you stack 4 rows, there are no particular problems. If you plan to exceed this threshold, the weight of the paint becomes significant, so I recommend wall brackets for the end connector and an intermediate one and using a little glue on the brackets (you don't need to glue everything; just glue the two outermost sides to give the structure a little more rigidity).
Novera
