DnD Inn - Fully interactive D&D / Pathfinder set

If you would like commercial license for my original designed prints, or would just like to tip to keep the printer going, please visit my Ko-Fi, I really appreciate any support! https://ko-fi.com/dungeonsandwyverns

 

Boost MeBoost if you'd like more large terrain projects!

 

The whole inn!

 

With 3 interlocking floor sections this inn has loads of play features for your games:

• An open chimney for the sneaky character to climb down
• A fully stocked bar for the dwarves to have some fun
• Opening and closing doors for the edgelord to slowly walk through
• A smokey corner for the ranger
• Fully stocked bedrooms for a great long rest
• A quest board that can hold your notices
• And much more!

 

With minimal supports, this prints well - the one shown is in PLA basic, with the doors and signpost in PLA wood.

 

All scatter shown can be found in my collection here: https://makerworld.com/collections/6737242

 

 

If using the A1 mini profile, you will need to superglue the halves of the floors together. I did this by plaving each part of some scrap paper, applying the glue, and then holding them together for 5 minutes.

 

 

To assemble the sign post, ensure your post fits in the gap on the first floor (give a light sanding if not), then add a dab of superglue.

 

Then fit the post into the gap and allow it to dry.

 

Push the sign all the way onto the post, and dab a small bit of glue on the end - this will stop your sign from falling off the post

 

Leave the glue to dry before moving the sign back to the end .

 

 

 

To insert the doors you can use a piece of filament. Straigthen a length just taller than the door and poke it down through the hole in the frame and door.

 

Once you are sure this piece is sat in the bottom of the doorframe, you can use glue to hold the top in place, then cut flush - or alternatively use a hot surface like a soldering iron to melt the filament flush with the frame.

 

 

I have other Terrain and Scatter, with more coming regularly. I also have a lot of bases, and some minis. More of each coming soon!

 

Happy gaming!