Wall mount for Metabo MWB 100

Boost MeIf you find my design useful, please boost this model.

 

This is a simple wall mount for attaching the Metabo MWB 100 workbench to the wall. I recommend using PETG HF filament for this print.

 

 

What you will need in addition to the filament:

1 x M3 x 40 mm screw

2 x M3 nuts

1 x 5 x 20 mm spring

 

Installation instructions:

 

Insert the M3 x 40 screw into the star nut and secure it with an M3 nut.

 

 

 

Insert the screw with the star nut into the locking mechanism.

 

 

Insert the spring into the rear hole of the locking mechanism.

 

 

Secure both with the second M3 nut.

 

 

The nut should be screwed in until it is fully inserted into the locking mechanism.

 

 

 

 

Now mount the two lower parts to the wall. Then place the Metabo MWB 100 onto the two lower parts and determine the correct position for the upper part with the locking mechanism.

 

 

 

After mounting the top part with the locking mechanism, the wall bracket is fully assembled and the Metabo MWB 100 can be hung on the wall.