Samurai Art Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 78.44x170mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #ffffff PLA Esun Cold White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Pumpkin Orange
    At layer #18 (1.52mm) swap to Cold White for the rest.