November 16, 2025
Description
I recommend following the Build Guide when assembling.
The list of necessary hardware is in the Build Guide.
Please contact me in case of questions or any confusion.
MembershipSubscribe to my membership to obtain a commercial license for all my models!Boost MeThanks for supporting my work!
Printing is not completely complicated, but it is not suitable for beginners.
002_axle can be reinforced by inserting a 3mm reinforcement (aluminum/fiberglass tube or similar).
2025/12/05 - A special body variant (007_Body_B.stl) for the version with a tarpaulin has been added. Holes for M2 screws have been added around the perimeter of the trailer for attaching the tarpaulin.
2025/12/11 - Added bottom-opening door variants. 007_Body_C.stl + 009_Door_C.stl / 007_Body_D.stl + 009_Door_D.stl (2x M2x8 or M2x10).
2026/02/11 - Added a new version of "tougher" fenders. 008_Fender_Flares_R_a.stl + 008_Fender_Flares_L_a.stl
2026/03/10 - Updated part 006_Floor to v2. Added mudflaps holders (But who has it ready, just make holes and possibly secure with a nut from the opposite side.).
I can recommend the TN2001GM. Or similar up to 90mm diameter.
The author makes no guarantees for completeness and security. The instructions may contain errors in the description of the procedure and in the list of necessary hardware. The author has taken great care in the creation of the print files, but problems can still occur. The author is not responsible for any issues that may arise.
The model is provided as is. The necessary tools must be available for assembly.
If you print it, I'd love to see it. Share here or tag me on instagram.
Instagram: @nb_crawling
License:
BY-NC-SA
PetrPatocka
