Railway Platform 10mm 1:32 scale

This is a scaleable platform based on 10mm (1:32) scale railways. The design allows any length platform to be printed (I personally made on 9.5m long about 11 reels of filament).

If doing this for an outside track, I would use PETG or ASA or similar to allow for sun/weather etc. Also, I have provided two types of base. One for freestanding platforms, the other allows the platform to be screwed/bolted to a base. 

Although all the parts off push fit, I would suggest glueing these where you plan to use it outside. 

One last thing. I threw in some drain covers and cracked paving that you can use to make the platform a little more “unique”. Word of warning. Make sure when you place them that you dont block the tabs under the platform that the arches fit into. I learnt that by myself :-(

Also required:  M3 x 12mm hex nut/bolt to join the platform pieces together. There are screw holes and nut spaces prepared in the .stl for this.