A2L | H2C Under Desk Build Plate Holder

This is the H2C version of my under-desk plate holder. It keeps your H2C build plates protected, easy to reach, and out of the way when tucked under a bench, table, or desk.

Four profiles are now included.

Original model with 2mm slots

• 5 plate version
• 8 plate version

Support for cutting mats with 2.4mm slots

• 5 plates .4mm nozzle
• 5 plates .8mm nozzle Bambu Translucent PETG
  • This is a slower print to try to keep the model as translucent as possible. Additionally, it uses 0% infill.
  • For printing with other materials, use the default Bambu 0.8 mm nozzle profile and set the infill to 15% adaptive cubic, 2 walls.
• If you are looking for a version that supports cutting mats with more slots, let me know, and I will prioritize it over other projects.

Use it to keep your build plates organized and safe. The holder is designed to mount low-profile under your desk or on a shelf, with slots spaced so plates slide in smoothly and do not rattle when the desk is bumped.

Mounting

• Recommended screws (use double sided foam tape when screws are not an option)
  • #12 or M5 wood screws
  • Length around ¾ to 1 inch (about 20 to 30 mm)
• Do not overtighten the screws; they only need to be snug against the plastic.
• Can be mounted
  • Under a desk or bench
  • On the underside of a shelf
  • On a wall or side panel, if you prefer a side mount

Always check your screw length against the thickness of your desk or shelf to avoid punching through the top surface.

Need a different plate size?

A1-Mini Under Desk Plate Holder - A1 Mini by Ulade MakerWorld: Download Free 3D Models
P2/X2/A1/P1 Under Desk Plate Holder P2S, P1, X1, A1, 3, 5, & 7 by Ulade MakerWorld: Download Free 3D Models

H2D/H2S H2 Series Under Desk Plate Holder H2D H2S x5,*7,10 by Ulade MakerWorld: Download Free 3D Models

This model is designed to match the feel and function of my other under-desk plate holders, scaled and tuned for H2C plates, with 5- and 8-slot options. Feedback is always welcome if you run into fit issues or have ideas for additional versions.