Cumulis Table Lamp

We’ve decided to open up our lamp designs to the maker community and allow anyone to print one!  

The Cumulis lamp has been a customer favourite at Dryft Home thanks to its soft, rounded silhouette and pleated texture — and now you can make your own version at home. If you can't print one yourself and you're in Canada or USA, consider supporting us at https://www.dryfthome.com.

Inspired by towering cumulus clouds, the Cumulis shade creates a warm, gentle glow that works beautifully on a desk, side table, or bedside stand. It’s a fully 3D-printed design and you can pair it with either of our two modern lamp bases: the minimalist Peak base or the ribbed Ridge base.

For the best results, follow the Orca Slicer settings below. We’ve also included Bambu Studio 3MF files to make printing easier — they haven’t been fully tested, so please check your settings before printing. In Bambu Studio you need to implement scarf seams in filament settings if you are using a different filament for the bases.

Print Details – Cumulis Shade

• Printer type: FDM
• Material: PLA - White recommended
• Layer height: 0.2 mm
• Size: 160mm wide by 200mm tall
• Filament needed: ~100g
• Nozzle size: 0.4mm
• Line width: 0.6mm
• Sprial Vase mode: On
• Brim: No brim
• Supports: No
• Bottom layers: 5
• Top Layers: 0
• Infill density: 0%
• Outer wall speed: 100mm/s or less

Print Details - Peak or Ridge Lamp Base

• Printer type: FDM
• Material: PLA - Matte filament recommended
• Layer height: 0.2 mm
• Peak Base Size: 130mm wide by 100mm tall
• Ridge Base Size: 190mm wide by 195mm tall
• Filament needed: 90-140g
• Nozzle size: 0.4mm
• Line width: default
• Bottom/Top layers: default
• Infill density: 15%
• Sprial Vase mode: Off
• Wall loops: default (2)
• Brim: No brim
• Supports: No
• Seam position: Back
• Staggered inner seams: checked
• Scarf joint seam: Contour and hole
• Scarf joint speed: 75%
• Scarf joint for inner walls: checked
• Wall Order Ridge: Outer Inner
• Wall Order Peak: Inner, Outer, Inner

For the 40mm lock washer, print in flexible filament. We use 95A TPU, 10% infill, 1 wall loop, 3 upper and 3 lower walls.

Assembly

To assemble the lamp, you’ll need a cord. We recommend a cord about 6 ft long with an inline rocker switch about 1.5–2 ft from the socket. The socket must be 40mm wide with a threaded base, as shown in the photos. We normally use a cord with an E26 standard bulb base and a US/CA plug. Use LED bulbs only to avoid heat buildup — 9W or less recommended.

You can easily find lamp cords online, but if you want the exact one we use, it’s available here:
https://www.dryfthome.com/products/table-lamp-cord?variant=45162499932217

Assembly video (same process as Mammatus):
https://cdn.shopify.com/videos/c/o/v/1761d9ace59a4949adf04db5f30c1c1f.mp4

If you’d rather skip printing and receive a finished lamp, the Cumulis Table Lamp is available here:
https://www.dryfthome.com

Pendant Alternative

The Cumulis shade also works beautifully as a pendant light. You’ll need a pendant cord with a 40mm threaded E26 socket and a ceiling canopy. These are widely available online, but if you’d like the exact one we use, you can find it here:
https://www.dryfthome.com/products/pendant-light-cord

Commercial License

If you're interested in printing and selling our lamp designs please explore the commercial license options on our profile.