Thin Red Line firefighter flag wall art - No AMS

Honor the Bravest

This Thin Red Line firefighter flag celebrates the courage and sacrifice of those who run toward danger to keep us safe. A bold, simple way to show support for firefighters and remember the heroes who’ve given their all.

You can hang on a wall, door or in a window.

There is a keyhole slot located on the back for easy hanging.

Size:  apx 9.5in x 7.5in or  240mm x 190mm.  All my signs use the max of an A1/P & X Series printer which is 256mm x 256mm or 10' x 10" so the longest side of the sign is usually close to this dimension.

Feel free to scale up or down.  Please note:  If you scale SMALLER, make sure you don't make the Z height any thinner than it is as it will effect the keyhole slot on the back.

Have an AMS?  Just add your colors and you are good to go as-is!

No AMS?

If you only have a single color 3D printer, just set up the print to pause/change filament on the following layers:

Start off with your base color. (This is the White layer in my photos) 
pause at layer 26 in your slicer to change your filament to the 2nd layer color (This is Black in my photos)
pause at layer 32 in your slicer to change your filament to the 3rd layer color (This is Red in my photos)