P2S/X2D Build Plate Holder

V3 (Updated on Jan 23, 2026): 
This update addresses two of the most common user concerns: the holder sliding out during high-speed printing due to vibration, and overly loose plate slots that allow plates to shift.
 

The fixture has been completely reworked to lock snugly into the air-intake slot. Installation is simple—apply a slight push (or lift the printer slightly), and the integrated hooks snap securely under the printer, keeping the holder firmly in place even during aggressive prints.


 

Boost MeAppreciated a boost if you’d like to support the model and help more people discover it!

Feb 1, 2026: New Design with Interchangeable Plate Sleeves, Check it out HERE.

V2 (Print Profile Removed) : 
I removed the optional magnet hole, narrowed down the plate slots slightly and increased the thickness of the bottom fins in response to user feedback. Note: For improved overhang print quality and updated brim settings, please use the V2 print profile.


V1 (Print Profile Removed) : 
A build plate holder designed specifically for the P2S, taking the new air intake into account so it doesn’t block airflow like many other existing designs. It also works with models that don’t have the air intake. Added rear wings improve stability, and there’s an optional slot for a 10×3 mm magnet.



=======================================================================
If you are interested in a more compact form factor, here is the link to my new design: