November 19, 2025
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 101.17x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm
#080a0d PLA BambuLab Basic Black Transmission Distance: 0.3
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Pumpkin Orange
At layer #15 (1.28mm) swap to Jade White for the rest.
License:
BY-NC-ND