Air Slam Hellfire Launcher | Over 20ft/6m High!

Want a hellfire missile launchpad that can launch rockets over 20ft/6m in the air?  No extra parts are needed, just print and launch some rockets.  You've got two different rockets to choose from, one is a scale model of a hellfire missile, and the other is a rocket optimized to fly as high as possible (it goes really high, lol).  All you have to do to launch a rocket is slam on the FIRE button and watch it fly -- it uses air pressure to shoot the rocket.

Bambu filaments used

• Launcher and button
  • Silk+ Silver
  • Matte Black
  • Basic Sunflower Yellow
  • Matte Red
  • Matte White
• Hellfire Missile
  • Polymaker Metallic Chrome (Amazon link)
  • Silk+ Silver
  • Basic Sunflower Yellow

Rockets

1. Super High Flying Rocket – shoots over 20ft / 6m in the air – I'm sure it can go even higher, but that's how high it went when I tested it.
2. Hellfire Replica – this one is a bit larger/heavier, so it won't launch as high in the air, 6-8ft+ / 2-3m+

Assembly

Practically no assembly – just pop the spring into the hole in the center of the red FIRE button and then push the button down into the launcher.  That's it….  Just place a rocket on the tube and then press hard/fast on the red FIRE button to launch it.

Remember to always point the launcher away from yourself and others.

Never point this model at people or animals.  Do not put any objects in the model that don’t come with the model.  Do not attempt to modify the model in any way.  Do not point at eyes or faces, always point the model away from yourself and others. Use of eyewear is recommended for anyone in the area.  This model should only be used by adults and kept away from children.