Shelly 1 - Wago holder

Caution

The following work should not be carried out without electrical knowledge. I'm not responsible for any damage caused. Everything you do is done at your own risk.
Unplug the power cord before opening the printer.

 

Boost MeHat Ihnen dieses Modell gefallen? Hinterlassen Sie doch gerne einen kostenlosen Boost! Damit helfen Sie, das Design sichtbarer zu machen und geben mir gleichzeitig die Motivation, weitere kreative Projekte zu realisieren.

BOM

• 2x Spade Connectors
• 2x Nut M3
• M3x min 12mm Socket Head Cap Screw
• 2x Wago 221-413
• 1x Shelly 1 configured

Assembly

The holder attaches to the inside of the Y-axis limit switch holes. You have to remove the limit switch beforehand. The existing screws must be replaced with longer ones.

Options

If you control the printer via Octoprint you can use the two plugins PSU Control and PSU Control - Shelly to switch the printer on and off.